MAGIK-ARM for Edge-Zero2/1996T/510T (RBAH1B2)

MAGIK-ARM 　12 features



• Unique design and high machining accuracy allows to minimize the "play" of tremolo arm.Smooth turning in torqueful condition.




• Even if it is arm-free condition, the "play" of tremolo arm is almost none.


• You can adjust torque with torque-cap screw, so you don't need any wrenches.
  
• Snap-in structure gives you easy arm removing.
• Teflon coating is treated on snap-in spring, so the bar rotation is smooth.
  
• High grade appearance by Japanese machining and plating.
  (Gold color is 24k Gold plating)
  
• "RED BISHOP" laser marking on the arm bar
• The shape of B2 bar is the almost same as Edge-Zero2, 1996T, 510T tremolo, so you can easily switch for using MAGIK-ARM.
  
• Not only original Edge-Zero2 tremolos, but you can also use MAGIK-ARM on Ibanez ZR ver1.1, GOTOH 1996T and GOTOH 510T(sheet metal baseplate type) synchronized tremolo.
  


• Unremovable treatment on torque-cap screw, you don't need to worry losting.
  
• Easy installing (Contains 2 wrenches)
• You can choose your favorite color from 4 colors.
• Shipped after checking one by one.

〈Instruction manual〉

・Remove the original arm holder.
Edge-Zero2
Loosen the screw and remove the socket.

GOTOH 1996T/510T
Please use monkey wrench and don't use attached 11mm wrench because it is very stiff.

・Install the MAGIK-ARM arm holder.
Get apart the temporarily assembled parts.

Put holder's spring slit toward tremolo block lika picture and fix arm holder by using 2 wrenches. (Turn 90 deg and fix if your tremolo is Ibanez ZR ver1.1)



Fix the snap-in spring with pushing snap-in spring toward arm holder like picture. This is important for good result.If you cannot insert arm bar because it is too hard, move the snap-in spring toward outside a little.


・Installing tremolo arm
After loosening torque-cap screw, push the arm bar into arm holder until it clicks.

・Removing tremolo arm
After loosening torque-cap screw with half rotation, and pull the arm bar.

〈Adjustment of arm torque condition〉

・Arm-torqued condition

Tighten the torque-cap screw strongly.



・Arm-free condition

Tighten the torque-cap screw softly.

〈Maintenance〉

For smooth arm bar rotation, we recommend to put CRC oil on the part of picture below at regular intervals.

　The ultimate update

Mr.Winy Wohlwend
Winy Custom Guitars
The MAGIK-ARM is the ultimate update for every Floyd Rose style Tremolo. It really works perfect and the annoying arm Play is past.In future builds I am going to equip every Floyd Rose Tremolo with the fantastic MAGIK-ARM!

　

　It's awesome.

Mr.C.V.
I installed my MAGIK-ARM today and LOVE It!!! Thank you so much! It's awesome. Keep up the great work, I'm telling everyone I know that they need to buy one. Cheers!

　

　No "play" in the arm holder！

Mr.Dokuyan
I've been using Original Floyd Rose made in West Germany for more than 30 years. Present Floyd Rose arm holder is better than the original screw type one, but there is still small "play" , so I used it with some patience. I make vibato by tremolo arm, so I used Floyd Rose tremolo arm with hard torque condition, still not enough though. I changed the torque depending on songs but little time between songs on stage because I have to tune pitch and do other things. So I had felt some stress. I found MAGIK-ARM by chance and tried, there is no "play", easy installing, easy torque adjustment, easy arm removing. It's very helpful! I bought Gold one and the appearance is excellent. I'll buy Black one next!

　Great！　The best tremolo arm ever！

Mr.T.M
I had a problem with the "play" of my Floyd Rose tremolo arm. I tried some products but they didn't satisfy me. When I purchased MAGIK-ARM, I doubted a little but after using it, I'm very impressed by the less "play" and the smoothness. Now I can concentrate on my guitar play. Maybe I'll put MAGIK-ARM on my other all guitars.